Clutch Adapter

$ 55.00

or 4 payments of $ 13.75 with Afterpay

Shipping
$6 Shipping Adapter / $16 Clutch w/Adapter.

 

SKU: CLL1573 Categories: ,

Description

Clutch Adapter

Replacement For OEM Part CLL1573

Victa Clutch Adapter

This clutch adapter allows a centrifugal clutch to be fitted to a 3/4″ or 19mm bore tapered shaft Victa 2 stroke engine and similar tapered or slant shaft engines. Manufactured by ABP Auto from an original late 60″s adapter.

Please use the option menu if you wish to purchase clutch and adapter as a combined kit,remember not to over tighten the end nut,.

  • Phosphate treated corrosion protection.
  • Lock nut thread size /  1/2″-16TPI  BSF.
  • Fitment to tapered shaft Victa 2 Stroke 125-160cc engine.
  • Takes a key-less #35 3/4″ bore centrifugal clutch.
PLEASE NOTE:
  • You must use a clutch that has a removable key way ( the key-way is no longer required ). The clutch is fixed using the 2 grub screws provided.

We recommend drilling 2 small holes on the adapter so the 2 grub screws can bite in deeper but this is purely optional and not required.

.

 

Additional information

Options

Clutch Adapter, 12 Tooth 3/4 Bore Clutch w/Adapter.

Instructions

1. Simply slide the sleeve on the engine shaft with the flange facing toward the engine.
2. Slide the clutch onto the sleeve.
3. Tighten the lock nut fully.
4. Insert and tighten the 2 clutch grub screws for extra locking of the clutch.
Hint- take the pull starter off exposing the fly wheel.( 4 bolts ) Use a spanner on the flywheel nut to help tighten the clutch nut.
Replace the pull starter.

Reviews

There are no reviews yet.

Be the first to review “Clutch Adapter”

Your email address will not be published. Required fields are marked *